General Characteristics of Printing Pile Fabric

Posted: 22nd Juli 2019 by fabricplush in Allgemein

Printing Pile Fabric (ROUROUROU) may be produced from different types of fibres: polyester, polyamide, rayon, viscose and cotton, and in combination with polyester, rayon, viscose, wool, acrylic (as the smallest component) and in other blends. An adhesive substance on the surface of the base fabric may be fixed as a scattered or dotted coating. In scatter coating, the adhesive is dispersed randomly on the base fabric. In dot coating, the adhesive is applied as a paste and printed in a regular pattern.

The adhesives which may be used for fusible interlinings are: polyamide, polyester, low and high density polyethylene, polyvinyl chloride, polypropylene and polyvinyl acetate. The fusing characteristics of the most widely used adhesives are as follows: Polyamide: used for interlinings in fusing a wide variety of fabrics, fusing for the main parts of ladies’ and men’s outerwear: fronts, facings. Low density polyethylene (LDPE): used for interlinings to fuse small components: armholes, fitting pieces, pocket flaps, straps, waistbands, pocket openings, belt loops, etc. High density polyethylene (HDPE): used in interlinings for fusing components of men’s shirts: collars (top fuse), cuffs and plackets. Polyester: used in interlinings for fusing the components of ladies’ wear such as blouses; effective in fusing polyester fabrics.

Huzhou Rourourou Needles Textiles Co., Ltd. is a company that manufactures and processes knitwear and textiles. Since its establishment, the company has been seeking solidarity and seeking development as its concept, ensuring customer first, service first and serving the society. The company is located in Zhuhu Industrial Park, Linghu, Huzhou City, Zhejiang Province. The company has many professional technicians and can meet the needs of customers. Production of a variety of high-end fashion fabrics.

Click Super And Soft Plush Fabric to learn about more information

Bright Plastic Follow Three Principles

Posted: 22nd Juli 2019 by brightpet container in Allgemein
Tags: ,
First, Bright Plastic follows safety and health principles. Urban residents need close contact when they use public facilities. Therefore, hygiene and safety are particularly important. On one hand, the production materials of the dustbin should be safe. So it’s important to choose materials with strong corrosion resistance and easy to clean; on the other hand, avoid contact with the hands as much as possible; For the dustbins in the living quarters, the design should avoid sharp edges and corners, providing safety and convenience for the elderly and children.

Second, Bright Plastic follows the human-computer interaction principle. The process of throwing garbage is only a few seconds. If you encounter a human-computer interaction obstacle when using a public dustbin, such as, you don’t know how to turn it on, the opening method is laborious or you cannot quickly determine which sorting bin to deliver, etc. People are confused and cannot follow the design to complete the operation process. Therefore, the design of the dustbin should follow the principle of easy-to-identify and easy-to-operate human-computer interaction.

Third, Bright Plastic follows coordination with the environment principles. Urban public dustbins are coordinated with the surrounding environment. They are an important part of public environmental facilities and exist between cities as part of the urban landscape environmental system. The design of public facilities with environmental art characteristics should follow the principle of harmony with the environment: The facilities and the surrounding environment should be harmonious. The facilities should reflect the cultural characteristics of the city and reflect the unique tradition and culture of the city. The design of the urban waste bin can be coordinated with the surrounding environment.

Plastic Dustbin is extensive in various industries including cleaning and sanitation, cleaning our cities, communities which is an environmentally friendly product in real life around us. More than 500 million dustbins are in use in China, 66% of which are iron and wood dustbins, and recyclable dustbins account for only 30%, so there is still a lot of space for plastic dustbins.

Metal stamping is a complex process that can include many metal forming processes – punching, punching, bending and perforating. Blanking: This process is about cutting rough outlines or product shapes. This phase is about minimizing and avoiding Burr, which increases your part cost and extends the lead time. This step is used to determine hole diameter, geometry/taper, edge to hole spacing and insert the first perforation. Blanking – Metal stamping design Bending: When you design a bend in a metal stamping, it is important to allow enough material – to ensure that the part and its blank are designed so that there is enough material to perform the bend. Some important factors to remember:

If the bend is too close to the hole, it may be deformed.
The width of the notches and tabs and the grooves should be at least 1.5 times the thickness of the material. If they are made smaller, they are difficult to form because the force exerted on the punch causes them to break. The radius of each corner in the blank design should be at least half the thickness of the material.
To minimize the number and severity of burrs, avoid sharp corners and complex cuts as much as possible. If these factors cannot be avoided, be sure to pay attention to the burr direction in the design to take these factors into account during the stamping process.

Imprint: This action is when the edge of the stamped metal part is crushed or broken; this creates a smoother edge in the molded area of ​​the part geometry; this also adds extra strength to the local area of ​​the part. This can be used to avoid secondary machining such as deburring and grinding.


NINGBO STARLITE MACHINERY TECHNOLOGY CO.,LTD. is an expert in the manufacture of metal stamping parts around you. In addition to the production of professional metal stampings, we also provide you with a variety of other equipment. Our Optical Cable Connector Boxe are designed with precision and are well received by our customers.

Common Maintenance Tips for Furniture Mould

Posted: 22nd Juli 2019 by xiu in Allgemein

1. Focus on the tracking of several important parts of the Furniture Mould(FURNITUREMOULD): the function of the ejector and guide parts is to ensure the opening and closing movement of the mould and the ejection of the injection products. If any of the product structures are stuck due to damage, the production will be stopped. Always keep the mould thimble and guide post lubricated (use suitable lubricant).

2. Regularly check the thimble, guide post, etc. for deformation and surface damage. Once found, replace it in time. After completing a production cycle process, it is necessary to apply the most reasonable anti-rust oil to the working surface, movement and guiding parts of the furniture mould, especially to protect the elastic strength of the bearing parts with gears, rack and die and the spring mould to ensure It is always in top working condition.

3. As the production time continues, the cooling channel is easy to deposit scale, rust, etc., which makes the cooling channel section smaller, the cooling channel narrows, greatly reduces the heat exchange rate between the coolant and the furniture mould, and increases the production cost of the enterprise. Therefore, the cleaning of the flow channel should be paid attention to; for the hot runner furniture mould, the maintenance of the heating and control system is beneficial to prevent the occurrence of production failure, so it is especially important.

4. After the end of each production cycle, the belt heater, rod heater, heating probe and thermocouple on the mould should be measured with an ohmmeter. If it is damaged, it should be replaced in time and with the furniture mould resume. Compare and make records so that problems can be discovered at the right time and countermeasures can be taken.

5. The surface maintenance of furniture mould can not be ignored, it directly affects the surface quality of the product, the focus is to prevent corrosion. Therefore, it is especially important to choose a suitable, high-quality, professional anti-rust oil. After the furniture mould has completed the production task, the residual injection moulding should be carefully removed according to different injection moulding methods. The residual injection moulding and other deposits in the mould can be removed by using copper rods, copper wires and professional mould cleaning agents, and then air-dried.

6. Dispose of hard objects such as wire and steel bars to avoid scratching the surface. If there is rust caused by corrosive injection moulding, use a grinder to grind and spray professional anti-rust oil, then store the thin-walled furniture mould in a dry, cool, dust-free place.

Click Air Cooler Mould to learn about more information.

Lyophilization of a Vacuum Freeze Dryer was used to prepare tissue samples for structural studies (eg, electron microscopy studies). Freeze drying is also used in chemical analysis to obtain dried samples or to concentrate samples to increase analytical sensitivity. Freeze-drying stabilizes the sample components without changing the chemical composition, making it an ideal analytical aid. Freeze drying can occur naturally. In the natural case, this process is slow and unpredictable. Through the freeze-drying system, people have improved and subdivided many steps to speed up the process.
https://www.gf-machine.com/wp-content/uploads/2018/04/123123123-1.jpg

Bell-type Vacuum Freeze Dry Machine: The freeze-drying chamber and the cold trap are upper and lower structures, and the freeze-drying chamber has no pre-freezing function. This type of lyophilizer requires manual operation when it is transferred to the drying process after the material has been pre-frozen. Most of the experimental Freeze Dry Machine are bell-type, with a simple structure and low cost. Most of the freeze-drying chambers use a transparent plexiglass cover to facilitate the observation of the lyophilization of the material.

In-situ freeze-drying machine vacuum freeze-drying machine: the freeze-drying chamber and the cold trap are two independent chambers, and the shelf in the freeze-drying chamber has a cooling function. After the material is placed in the freeze-drying chamber, the material is pre-frozen and dried. The process does not require manual operation. This type of freeze dryer has a complicated manufacturing process and high manufacturing cost, but the in-situ freeze dryer is the development direction of the freeze dryer, an ideal choice for lyophilization process, especially suitable for medicine, biological products and other special products.

Ordinary shelf type vacuum freeze-drying machine: The material is bulk-packed in the material tray and is suitable for lyophilization of food, Chinese herbal medicine and powder materials.

Vacuum lyophilizer with gland type device: suitable for drying of bottled materials in Xilin. When lyophilized, prepare the materials in the vials as needed, float and cover the caps, freeze-dry them, and operate the gland mechanism after drying. The bottle cap can be pressed to avoid secondary pollution, re-adsorb moisture, and easy to store for a long time.

Correct Use Of Passenger Elevators

Posted: 22nd Juli 2019 by odson don in Allgemein
Tags:

In order to better ensure the safe operation of the elevator, reduce the occurrence of faults and ensure the personal safety, normal life and work of passengers, Dongguan Elevator Company introduced according to the elevator performance and use specifications, passengers should use the elevator correctly according to the following requirements:

  1. Do not exceed the rated number and load capacity by the ladder. It is strictly forbidden to use the elevator for overtime, overweight and oversized. When the overload occurs, the elevator will alarm. Please take the initiative to polite, exit and take the next elevator.
  2. When entering and leaving the elevator, the elevator will automatically open and close. Do not attempt to open the elevator door by hand or lean your body against the elevator door to avoid personal injury.
  3. Operate the elevator properly, do not hit the button with hard objects.
  4. Don’t play and jump in the elevator, and rude behavior is prohibited in the car.
  5. Do not smoke in the elevator. It is forbidden to bring other fires into the elevator.

Otse elevator specializes in مصعد الركاب, sightseeing elevators, medical elevators, car elevators, cargo elevators, dining ladders, sundries elevators, escalators, moving walkways and other types of elevator sales, elevator installation, elevator maintenance, elevator maintenance and electricity. Escalator accessories factory sales. If you want to know more about this, please pay attention to our official website.